Tubular Balloon Squeezing
▪ Turn Table the fabric trolley rotation will makes the
untwisting of the fabric easier by operating in synchrony with the DE- Twister. The structure is completely in stainless steel and designed for processing even heavy
▪ DE-Twister used to remove any tension from the rope. It ensures optimum untwisting without elongation.
▪ Blower with Pump for create the fabric balloon under the DE-Twister immediately.
▪ 1st Foulard consist of two rubber rollers for squeezing the fabrics.
▪ 2nd Foulard for the used to impregnate fabrics with
chemical. Fabric silicone-finishing chemicals 10-20% upon receiving on balloon squeezing process.
▪ Magnetic Stretcher for obtain the best desired width for the fabric.
▪ Mixer Tank designed for the preparation of chemical products to be applied to fabric.
|HEATED DRUMS WIDTH||1600 mm.|
|WORKING WIDTH||250-1200 mm. / At stretcher 1300 mm.|
|MAGNETIC STRETCHER & FEEDING||Magnet system / %20 Fabric feeding|
|WORKING SPEED (Max.)||80 m/min|
|VOLTAGE||380-440V, 50-60 Hz|
|ELECTRICITY CONSUMPTION||19 kW +/-5%|
|WATER CONSUMPTION||0.5 m³/h|
|AIR PRESSURE||0-6 bar|
|SQUEEZING FOULARD CYLINDERS||Ø 250 mm rubber / 90-95 Shore A|
|IMPREGNATION FOULARD CYLINDERS||Ø 250 mm rubber / 80-85 Shore A|